基于DEM-CFD耦合的气吸式排种器仿真研究
作者:
中图分类号:

S223.2

基金项目:

国家重点研发计划(2017YFD0701201-02)


Simulation of an air suction seed drainer based on DEM-CFD coupling
Author:
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • | |
  • 文章评论
    摘要:

    为提高大白菜等小粒径精密播种机的机械化水平,设计了一种小粒径气吸式排种器.首先利用JPS-12排种器性能检测试验台对排种器进行测试,得到不同参数组合下的性能指标与最优参数组合.然后使用计算流体力学方法(CFD),借助FLUENT软件分析了吸种器内部流场的分布,得到了吸种器内部压力分布云图和吸种孔截面云图.最后基于离散元法(DEM)建立大白菜种子颗粒模型,对排种器仿真模型进行简化和网格划分,完成了小粒径气吸式排种器DEM-CFD耦合仿真实验.对比台架与仿真试验结果,得出如下的结论:当排种盘转速为20 r/min,真空度为2.2 kPa时,排种性能最佳.

    Abstract:

    An air suction seed drainer was designed and simulated in order to improve the mechanization level of precision seeders applicable for small size grains such as Chinese cabbage seeds.Firstly,the performance of the seed metering device was acquired through tests using performance test-bench of JPS-12,based on which the optimal parameter combination was obtained.Then,the flow field distribution inside the air suction chamber under different vacuum degrees or rotating speeds was analyzed using computational fluid dynamics (CFD) and FLUENT software,and a seed shape model of Chinese cabbage was established based on discrete element method (DEM).Finally,the seed metering device simulation was carried out by a simplified model and grid meshing.The comparison between bench test and simulation result showed that the air suction seed drainer performed best when the rotating speed of seed metering tray is 20 r/min and the vacuum degree of air suction chamber is 2.2 kPa.

    参考文献
    [1] 霍文国,肖继军,吕钊钦.浅析气力式精密播种机的发展及研究现状[J].山东农机,2003(3):11-12 HUO Wenguo,XIAO Jijun,LÜ Zhaoqin.Development and research status of pneumatic precision seeder[J].Shandong Agricultural Machinery,2003(3):11-12
    [2] 陈立东,何堤.论精密排种器的现状及发展方向[J].农机化研究,2006(4):16-18 CHEN Lidong,HE Di.Discussion on the current situation of the planting device and developing direction[J].Journal of Agricultural Mechanization Research,2006(4):16-18
    [3] 魏海明,杨发展,李建东,等.气吸垂直圆盘式水稻精量排种器设计与试验[J].农业工程,2018,8(11):93-96 WEI Haiming,YANG Fazhan,LI Jiandong,et al.Design and experiment of air-suction vertical disc precision seed metering device for rice[J].Agricultural Engineering,2012,8(11):93-96
    [4] 陈江辉.气吸式排种器排种性能试验研究[J].新疆农机化,2018(3):11-13 CHEN Jianghui.Experimental study on performance of air-suction seeding metering device[J].Xinjiang Agricultural Mechanization,2018(3):11-13
    [5] 池丹丹,杜雄,赵晓顺,等.基于计算机仿真的气吸式谷子精量排种器设计[J].江苏农业科学,2018,46(11):183-187 CHI Dandan,DU Xiong,ZHAO Xiaoshun,et al.Design of air-suction millet precision seed-discharge device based on computer simulation[J].Jiangsu Agricultural Sciences,2018,46(11):183-187
    [6] 刘彩玲,宋建农,王继承,等.吸盘式精密播种装置气力吸种部件流场仿真分析[J].中国农业大学学报,2010,15(1):116-120 LIU Cailing,SONG Jiannong,WANG Jicheng,et al.Analysis of flow field simulation on vacuum seed-metering components of precision metering device with sucker[J].Journal of China Agricultural University,2010,15(1):116-120
    [7] 心男.基于EDEM-FLUENT耦合的气吹式排种器工作过程仿真分析[D].长春:吉林大学,2013 XIN Nan.Simulation analysis of working process of air-blowning seed-metering device based on coupled EDEM-FLUENT[D].Changchun:Jilin University,2013
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

张凯,洪杨,徐祝欣.基于DEM-CFD耦合的气吸式排种器仿真研究[J].南京信息工程大学学报(自然科学版),2020,12(6):767-772
ZHANG Kai, HONG Yang, XU Zhuxin. Simulation of an air suction seed drainer based on DEM-CFD coupling[J]. Journal of Nanjing University of Information Science & Technology, 2020,12(6):767-772

复制
分享
文章指标
  • 点击次数:970
  • 下载次数: 2071
  • HTML阅读次数: 0
  • 引用次数: 0
历史
  • 收稿日期:2020-07-03
  • 在线发布日期: 2020-12-30

地址:江苏省南京市宁六路219号    邮编:210044

联系电话:025-58731025    E-mail:nxdxb@nuist.edu.cn

南京信息工程大学学报 ® 2025 版权所有  技术支持:北京勤云科技发展有限公司